A roof coating is a liquid membrane rolled or sprayed over a clean, dry roof that dries into a seamless protective layer. It can seal minor wear and reflect sunlight on a sound roof. Call the number on this page to be connected with a local roofing contractor in Freeland.

Reflective and protective benefits
A white coating bounces sunlight away, which reduces heat on a flat roof in summer. It also shields the old surface from ultraviolet light and weather. In a wet, mild region the main gain is protection and sealing rather than cooling. The roofer can explain the benefit on your building.
How a roofer tests for moisture
Before coating, a roofer may use a moisture meter, an infrared scan or small cut samples to find wet insulation. Coating over trapped moisture seals it in. A dry roof is the single biggest factor in whether the job succeeds. Ask to see the readings or photos.
Shade beneath big trees keeps a roof damp and encourages algae, which can undermine a coating if the surface is not cleaned and dried first.
Waterfront roofs see more moisture and spray, which can slow drying times and weaken adhesion if the work is rushed or the surface is not fully dry.
Before you call in Freeland
On permits, the Island County PCD says: all roof-covering projects, new and replacement, require a building permit.
Washington requires roofing contractors to register with the Department of Labor & Industries. L&I's Verify a Contractor tool shows a company's registration status before you sign anything.
On the island, wind off the water and salt spray are hard on fasteners and flashing. Ask whether the company already works on Freeland homes.
Most roof trouble in this part of Washington shows up in the wet season, when a small gap in flashing or a lifted shingle has months of rain to work on.
Tall evergreens around Freeland drop needles that fill valleys and gutters and keep roofs shaded and damp, which is where moss starts.
Electric service here comes from PSE (outages: 888-225-5773). Keep away from any line touching the house or a fallen tree.
Nearby, the same kind of help is available in Mukilteo, Hansville and Langley.
Coating a failing coating
An old coating that is peeling, flaking or blistered must be removed or stabilized first. Applying new material over loose old film leads to the same peeling. Prep determines how long the new coat lasts. Ask the roofer how old coating will be prepared and which product is compatible.
Warranty and documentation
Coating makers often offer material warranties that require approved prep, products and thickness. Ask what the warranty covers and what the roofer provides in writing. Keep records of the product, date and roof condition for future reference. A roofer can explain what the maker requires and what workmanship coverage is added.
Safety and fumes
Some coatings give off odors during application, and wet surfaces are slippery. Keep children and pets away from the work area and follow the roofer's instructions on ventilation. Roof work is for trained crews only. Never climb onto the roof to inspect work, and keep ladders away from power lines.
Roof Coating questions in Freeland
How long does a roof coating last?
When is a coating not enough?
Can you coat over an old coating?
Will a white coating lower my energy use?
More roofing services in Freeland
Roof Coating nearby
Helpful guides
Sources
Last updated: