Roof replacement removes the old roof covering, repairs any bad decking, and installs new underlayment, flashing and roofing. A Seattle cost guide puts a typical whole-roof job between about $8,045 and $17,399. Call the number on this page to be connected with a local roofing contractor in Seattle.

What a replacement involves
A full replacement starts with tearing off the existing roofing down to the deck. Seattle's residential code treats roof replacement as removal of existing coverings to the deck, and it does not allow re-covering over a roof that already has two or more applications of roofing or one that is water-soaked or deteriorated. The crew then repairs the sheathing as needed, lays underlayment, installs flashing at walls, vents and valleys, and puts down the new roof.
When replacement makes sense
- Shingles are curling, cracking or losing granules across most of the roof
- Leaks keep appearing in different places after repairs
- Decking is soft or stained from long-term moisture
- Moss has been left for years and the shingle edges are lifting
- The roof already carries two layers
Seattle's rainy season runs October through March according to the National Weather Service, so many owners prefer to plan around the drier months, though contractors schedule work through the year when weather allows.
What it costs
Angi's Seattle cost guide lists typical whole-roof replacement at roughly $8,045 to $17,399 per job. The same guide shows removal and disposal at about $1 to $5 per square foot, and sheathing repair, if needed, at about $2 to $7 per square foot. For a wider view, This Old House reports a Washington-wide range of $6,156 to $20,811. Material choice, roof size, pitch and access all move the number, so treat these as ranges, not quotes. Metal and cedar cost more than asphalt shingles; see metal roofing for that comparison.
Seattle permit rules
Seattle SDCI says a re-roof permit is required when repairing an area greater than 500 square feet, and that replacing roof cover, sheathing or insulation on commercial and multifamily projects requires a permit. Re-roofing one- and two-family homes and townhouses generally does not need a permit if the building envelope is unchanged apart from adding or replacing insulation. SDCI also says insulation must be brought up to current energy standards when the sheathing or cavity is exposed. Ask your roofer who is responsible for permit questions.
Choosing a roofer
Roofers in Washington must be registered with L&I, and the Verify a Contractor tool shows registration status, workers' comp and any citations. Get written bids that state tear-off versus overlay, underlayment, flashing, ventilation and cleanup, and ask what the manufacturer's warranty on materials covers. Before final payment, get signed lien releases.
Roof Replacement questions from Seattle homeowners
How much does a new roof cost in Seattle?
Do I need a permit to replace my roof in Seattle?
Can new shingles go over the old ones?
How do I check a roofer before hiring?
Related roofing services in Seattle
Roof Replacement in nearby cities and towns
King County
Snohomish County
Pierce County
Kitsap County
Island County
Mason County
Jefferson County
Sources
Last updated: