A bathroom fan that ends in the attic pushes steam straight onto cold sheathing and insulation, which is a common source of mold and rot. It should be ducted outdoors, and a roofer can often arrange a proper roof or wall termination for a home here. Call the number on this page to be connected with a local roofing contractor in Tacoma.

Ceiling stains that are not leaks
Brown spots on upstairs ceilings do not always mean a roof leak. Warm indoor air can carry moisture into the attic, where it condenses and drips back down. A roofer will check for both causes before recommending flashing repairs or vent changes. Photos help sort it out.
Bath fans and kitchen exhaust
A fan that ends in the attic dumps a shower's worth of steam onto cold wood every day. Even a duct that is disconnected or sags can leak moisture. Fans should run through insulated duct to a proper outdoor termination, not just near a vent.
What drives the quote
- Type of vents chosen
- Number of cuts through the roof or soffit
- Attic access and insulation to move
- Repairs to damaged decking
- Disposal and cleanup
Ask the roofer to walk through each item on the quote, since vent type and cut count often matter more than the overall roof area.
Know this about Tacoma roofs
Building permits for Tacoma homes are handled by the City of Tacoma permit office. Small repairs often need nothing, while a tear-off, new sheathing or structural work usually does, so ask the roofer who pulls the permit.
Washington requires roofing contractors to register with the Department of Labor & Industries. L&I's Verify a Contractor tool shows a company's registration status before you sign anything.
Most roof trouble in this part of Washington shows up in the wet season, when a small gap in flashing or a lifted shingle has months of rain to work on.
Storm took out power too? Report it to Tacoma Power at 253-502-8602, and stay clear of any downed line.
If the damage came from a storm, write down the date and keep your photos; you may want them for an insurance claim.
Contractors that take calls here usually also work in University Place, Fife and Lakewood.
Ridge vents explained
A ridge vent is a continuous opening along the peak covered by a vent cap. It works well when soffits supply air and nothing else competes with it. Ask whether your roof framing supports it and how it will handle wind-driven rain. Wind-driven rain and snow should be addressed.
Do not seal the vents
It can be tempting to stuff vent openings or cover them to stop drafts. Blocking soffits or ridge vents makes condensation worse. Leave existing vents as they are and let a roofer decide what to change. A roofer can recommend better options after seeing it.
Around Tacoma
Calls come in from across Tacoma, including around Downtown Tacoma, Hilltop, Stadium District.
Tacoma's wettest months run from November through January, with dry summers that make the best reroofing season.
Roof Ventilation questions in Tacoma
Can a bathroom fan vent into the attic?
How do I know if my attic has enough ventilation?
Can ventilation be added to an existing roof?
What does a ventilation inspection involve?
More roofing services in Tacoma
Roof Ventilation nearby
Helpful guides
Sources
Last updated: