Roofing referrals for Seattle & nearby townsCall: (206) 984-7830
(206) 984-7830

Chimney Flashing Repair in Bellevue, WA

roofingseattle.net

Where brick meets roof is a classic leak spot, and this page connects Bellevue homeowners with independent roofers who fix chimney flashing.

Chimney flashing rusting in Bellevue?
Call now to be connected with a local roofing contractor in Bellevue.
(206) 984-7830

Water near a chimney can come from the flashing, the mortar joints, the cap or the crown, so the cause needs confirming before anything is replaced. A roofer can narrow it down. Call the number on this page to be connected with a local roofing contractor in Bellevue.

A brick chimney with new metal flashing installed on a shingled roof, chimney flashing repair in Bellevue, WA

Flashing leak or mortar leak?

Flashing leaks tend to show at the roofline, around the base of the chimney. Mortar and brick leaks arrive through the chimney body and can appear higher up. Dampness on the outside brick above the roof points to masonry, not metal.

How chimney flashing is built

The base of the chimney is wrapped in layers. Step flashing goes up the sides, a front apron lies under the shingles, and counter-flashing is tucked into cut mortar joints above to cover the top edge. Each layer depends on the others for protection.

Many homes in Bellevue date to the 1980s, and original brick chimneys with aged mortar and tar-patched flashing are common, so a mason's opinion often goes hand in hand with the roofer's.

Call now to be connected with a local roofing contractor in Bellevue.
(206) 984-7830

Questions that affect the quote

  • How wide is the chimney, and how tall above the roof?
  • What is the roof pitch and shingle type?
  • Is the mortar sound or crumbling?
  • Is there a cricket already?
  • Has it been sealed before?

What the roofer inspects

Expect a close look at the base flashing, counter-flashing, mortar lines, cricket, nearby shingles and the attic. A roofer should show where the water is getting in and say whether the masonry needs a mason. Ask for photos of any problem areas.

Before you call in Bellevue

If the job grows from a patch into a full reroof or framing repair, check with the City of Bellevue permit office before work starts.

A quick check that pays off: enter the contractor's name in L&I's online verify tool to confirm an active Washington registration.

Most roof trouble in this part of Washington shows up in the wet season, when a small gap in flashing or a lifted shingle has months of rain to work on.

Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.

Much of the housing in Bellevue dates to the 1980s or earlier, so a tear-off can uncover older layers or board decking that need extra work.

If the damage came from a storm, write down the date and keep your photos; you may want them for an insurance claim.

Contractors that take calls here usually also work in Medina, Redmond and Mercer Island.

Use of the fireplace

Hold off using the fireplace if water is coming down the flue or the firebox is soaked, and ask a chimney professional about the flue's condition before the next fire. Damp masonry can also hide cracks that affect safe burning.

Around Bellevue

Calls come in from across Bellevue, including around Downtown Bellevue, Bellevue Square, Crossroads.

Rain falls frequently from fall through spring here, which keeps shaded roofs damp for months.

Chimney Flashing Repair questions in Bellevue

Why does my chimney leak where it meets the roof?
Brick and wood move at different rates, so the joint between them opens over time. Rusted flashing, dried sealant and a missing cricket are the usual causes.
Is the leak from the flashing or the mortar?
Leaks at the roofline often point to flashing, while dampness on the brick above the roof suggests mortar, crown or cap trouble. A roofer can help confirm which.
What does a chimney crown do?
The crown is the sloped concrete slab on top that sheds water away from the flue and brick. Cracks in it let rain soak the stack.
How are repair prices decided?
Each independent roofer sets its own price based on chimney size, roof pitch, access and what is damaged. This referral service does not set or quote prices.

More roofing services in Bellevue

Chimney Flashing Repair nearby

Call now to be connected with a local roofing contractor in Bellevue.
(206) 984-7830

Last updated:

☎ Call (206) 984-7830