A brick chimney and a wood-framed roof expand and settle at different rates, so the joint between them is a common leak point. Roofers rebuild the flashing there, and sometimes a mason repairs the brick. Call the number on this page to be connected with a local roofing contractor in Fox Island.

Is it the chimney at all?
A nearby skylight, vent pipe or roof valley can leak and send water along the framing to the chimney area. A careful roofer traces the water from the stain back upslope rather than assuming the brick is guilty.
Mortar, cap and crown trouble
- Crumbling mortar joints that soak up rain
- Cracked crown, the concrete slab on top
- Missing or rusted chimney cap
- Spalling brick faces flaking off
These need a mason, and fixing flashing alone will not stop them.
Under heavy tree cover, the uphill side of a chimney becomes a debris trap, so a cricket and regular cleaning can make a real difference.
Near the water, salt speeds rust on thin metal around a chimney, so flashing can fail sooner than it would inland.
Useful local facts for Fox Island
Fox Island is unincorporated, so building permits run through Pierce County PPW rather than a city hall.
Before work begins, look the company up on L&I's Verify a Contractor page. Washington requires construction contractors, roofers included, to be registered.
Island homes like those in Fox Island face open-water wind and salt air, and a roofer's travel by ferry or bridge can affect scheduling, so ask about timing when you call.
Fall and winter windstorms are the main source of sudden roof damage around Puget Sound. Lifted tabs and loose ridge caps are worth a look after a blow.
Tall evergreens around Fox Island drop needles that fill valleys and gutters and keep roofs shaded and damp, which is where moss starts.
Storm took out power too? Report it to Peninsula Light at 877-853-1388, and stay clear of any downed line.
Calls from Fox Island are often matched with roofers who also cover University Place, Gig Harbor and Lakewood.
Mason and roofer scopes
The roofer covers metal, shingles and the cricket, while a mason handles brick, mortar and crown repairs. Having both on one project means two prices. Ask each what is included, so no step falls between them and you avoid paying twice.
What a clean repair looks like
Look for fresh metal lapped over shingles, counter-flashing tucked into neat mortar grooves, a tidy sealant line and a sloped cricket if the chimney is wide. Smeared tar, exposed nails and flattened shingles near the brick suggest a rushed job.
After a windstorm
Strong winter winds can lift flashing, knock a cap loose or shift a tall stack. From the ground, look for bent metal, missing pieces and fresh gaps. Photograph them and collect anything fallen. Those records help the roofer and any insurance conversation.
Chimney Flashing Repair questions in Fox Island
What is the difference between step flashing and counter-flashing at a chimney?
Is caulk enough to stop a chimney leak?
Does this service charge me for the call?
How often should chimney flashing be checked?
More roofing services in Fox Island
Chimney Flashing Repair nearby
Helpful guides
Sources
Last updated: