Water near a chimney can come from the flashing, the mortar joints, the cap or the crown, so the cause needs confirming before anything is replaced. A roofer can narrow it down. Call the number on this page to be connected with a local roofing contractor in Kenmore.

Flashing leak or mortar leak?
Flashing leaks tend to show at the roofline, around the base of the chimney. Mortar and brick leaks arrive through the chimney body and can appear higher up. Dampness on the outside brick above the roof points to masonry, not metal.
Settling and wind movement
Tall brick stacks sway slightly in winter storms and shift as the house settles, stressing the flashing line. A chimney leaning even a little, or a visible separation from the house wall, deserves a mason's look in addition to the roofer's.
Under heavy tree cover, the uphill side of a chimney becomes a debris trap, so a cricket and regular cleaning can make a real difference.
Before you call in Kenmore
For permit questions on a reroof, start with the Kenmore Development Services. A contractor who works here regularly will know whether your job needs anything filed.
Before work begins, look the company up on L&I's Verify a Contractor page. Washington requires construction contractors, roofers included, to be registered.
Most roof trouble in this part of Washington shows up in the wet season, when a small gap in flashing or a lifted shingle has months of rain to work on.
Tall evergreens around Kenmore drop needles that fill valleys and gutters and keep roofs shaded and damp, which is where moss starts.
Electric service here comes from PSE (outages: 888-225-5773). Keep away from any line touching the house or a fallen tree.
Write down when the leak appears: every rain, only in wind-driven rain, or only after snow. That detail points straight to the cause.
Calls from Kenmore are often matched with roofers who also cover Mountlake Terrace, Bothell and Shoreline.
Common jobs and what drives them
| Job | What drives the cost |
|---|---|
| Reflash chimney | Size, faces, roof pitch |
| Build a cricket | Chimney width, framing |
| Repoint mortar | Height, brick condition |
What a clean repair looks like
Look for fresh metal lapped over shingles, counter-flashing tucked into neat mortar grooves, a tidy sealant line and a sloped cricket if the chimney is wide. Smeared tar, exposed nails and flattened shingles near the brick suggest a rushed job.
Loose brick or leaning stack
Bricks that have shifted, a visible lean or chunks falling from the top are safety issues. Keep people and pets away from the area below and call promptly. A mason and a roofer may both be needed, and a fall risk is more urgent than a drip.
Chimney Flashing Repair questions in Kenmore
Is caulk enough to stop a chimney leak?
How are repair prices decided?
Can chimney flashing be fixed without replacing the roof?
Does moss near the chimney matter?
More roofing services in Kenmore
Chimney Flashing Repair nearby
Helpful guides
Sources
Last updated: