Most commercial jobs start with a roof walk and a condition report that records seams, drains, flashings and wet areas. That report supports a repair, coating or replacement decision. Call the number on this page to be connected with a local roofing contractor in Kenmore.

How commercial differs from residential
The roofs are larger, flatter and more tied to drains and building systems. Paperwork, schedules and warranties carry more weight, and several people may approve the work. The core need is the same: keep water out. Ask the roofer to explain how the process will work for your building.
Phasing the work
Large roofs are often done in sections so that part of the building stays covered and usable. Phasing can protect inventory and tenants, though it can lengthen the schedule. Ask how sections will be sealed at the end of each day. Ask how the roofer handles sections left open overnight.
Useful local facts for Kenmore
If the job grows from a patch into a full reroof or framing repair, check with the Kenmore Development Services before work starts.
A quick check that pays off: enter the contractor's name in L&I's online verify tool to confirm an active Washington registration.
Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.
With big firs and cedars close to many homes in Kenmore, falling limbs during windstorms are a real roof risk. Trimming overhanging branches helps.
Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.
Write down when the leak appears: every rain, only in wind-driven rain, or only after snow. That detail points straight to the cause.
Contractors that take calls here usually also work in Mountlake Terrace, Bothell and Shoreline.
Warranties on commercial roofs
Manufacturers offer material warranties of varying length, and some require approved installers or specific details. Roofers may add their own workmanship coverage. Ask what is included, what voids it and who handles claims. Ask the roofer to explain, in plain language, what the workmanship coverage adds beyond the material warranty.
Metal roofs on shops and warehouses
Metal panels fail at fasteners, seams and flashings rather than across the panel. Rust, loose screws and failed sealant cause most leaks. A roofer may reseal, replace fasteners or coat the roof, depending on its condition. Ask the roofer to check fasteners and ridge seams first.
Hiring checklist
- Registration with Washington L&I verified
- Written scope and photos of problems
- Tenant, parking and safety plan
- Warranty terms in writing
Compare at least two bids when time allows. Ask each roofer the same questions and compare answers side by side before choosing, then keep the written responses with the building records.
Commercial Roofing questions in Kenmore
What affects commercial roofing cost?
Who pays for the roof on a condo building?
Does a commercial reroof need a permit?
What is a maintenance program for a commercial roof?
More roofing services in Kenmore
Commercial Roofing nearby
Helpful guides
Sources
Last updated: