In an HOA or condo, the roof is often a shared decision with shared costs, and the rules sit in documents most owners have not read. This guide explains the usual structure and the questions to ask.
Start with who owns the roof
The first question is simple and not always obvious: who is responsible for the roof? In many Seattle-area communities, the answer is in the governing documents, often called the declaration, CC&Rs, bylaws and rules. Large subdivisions across the Eastside, Snohomish and Pierce counties, townhome rows and condo buildings each divide this differently. Some associations own and maintain every roof as a common element. Others treat the roof as the owner's, but control the materials, colors and schedule. Some split the work, with the association handling the roof surface and the owner handling skylights or penetrations.
Read the documents, not the sales brochure. Look for definitions of common elements, limited common elements and unit boundaries, the sections on maintenance and repair, and any language about assessments. If you cannot find an answer, ask the board or management company in writing. This guide is general information, not legal advice, and for a disputed or complicated question you may want an attorney who handles association law.
Who decides when a roof gets replaced
In most associations the board of directors decides, usually guided by a reserve study, an inspection report and bids. Larger or unusual expenses may need a membership vote, depending on the documents. A board may also adopt a rolling plan, replacing a few buildings a year so the cost is spread out. If you are an owner, you generally cannot reroof your own unit separately when the roof is a common element, even if you see a leak. Report it to the board or manager in writing, with dated photos.
It helps to understand the process behind the decision, because that is where owners can contribute. A typical sequence looks like this:
- A roof assessment documents the roof's condition, remaining life and drainage problems.
- The board reviews its reserve funding and options, such as repair, partial replacement or full replacement.
- The board gathers written bids against a common scope.
- Owners are told about the plan, timing and any assessment, as required by the documents.
- A contract is signed, a permit is obtained where needed and work is scheduled around the wet season.
Who pays
Money usually comes from one of three places: reserve funds the association has built up over time, a special assessment charged to owners, or a loan the association takes out and repays through dues. A healthy reserve means a roof is a planned event. An underfunded reserve means owners may face a large one-time charge or a dues increase. Ask to see the most recent reserve study and budget, and what portion is set aside for roofs.
For rough scale, remember that published cost figures are per-job averages for single houses, not buildings with many units. Angi's Seattle guide puts a typical whole-roof replacement at about $8,045 to $17,399 per job for a house, and installed asphalt shingle at about $3 to $11 per square foot. A multi-unit building has much more roof area, so a bid will sit well above a single-home figure. Our roof replacement cost guide explains what drives those numbers, and the commercial roofing page covers larger low-slope buildings.
Roofs, weather and timing
Scheduling matters more than owners expect. The National Weather Service describes a Sea-Tac rainy season from October through March, with more than 75 percent of annual precipitation in that wet season. Many large jobs are planned for the drier months, but a project can drift into wet weather, so ask how the contractor protects an open roof, handles interior leaks and decides to pause work. Fir and cedar canopy and moss pressure also affect material choice. Compare options with our guide to shingles, metal or cedar for the Northwest, and ask whether the association has a roof maintenance plan. A routine roof maintenance program is often less costly than an early replacement.
Material and appearance rules
Associations commonly control roof color, material and profile to keep a uniform look. Your governing documents may require approval from an architectural committee for changes. That can limit your choices: cedar shake may be required, prohibited or preferred, and metal may need approval. Ask whether a given material is allowed before you fall in love with a sample, and ask who covers added cost if the board chooses a pricier option. If the association requires a particular material, ask for the manufacturer and the warranty documents on file.
Solar panels and Washington law
If you want solar, Washington law speaks to it. RCW 64.38.055 says homeowners association governing documents may not prohibit installing a solar energy panel that meets applicable health, safety and performance standards, but may bar panels from being visible above the roofline and may require visible hardware to be painted to coordinate with the roofing material. That statute is about homeowners associations, and condominiums are covered by different laws, so a condo owner should check the condo documents and ask an attorney. Plan solar before a reroof if you can, because panels often need to come off and go back on, and flashing around mounts is a leak risk. See roof flashing repair for why those details matter.
Getting bids the board can compare
Boards get better bids when every roofer prices the same scope. A written scope should cover tear-off versus overlay, underlayment, flashing, ventilation, decking repair allowances, drainage, protection of landscaping and cleanup. For a replacement, Seattle's residential code says roof replacement includes removing the existing roof covering down to the deck, and re-covering is not allowed where there are already two or more applications or where the roof is water-soaked or deteriorated. That applies to Seattle's one- and two-family code; other jurisdictions and building types may differ, so ask the local building office.
On permits, SDCI states that replacing roof cover, sheathing or insulation on commercial and multifamily projects requires a permit, while re-roof work on one- and two-family homes and townhouses generally does not if the building envelope is unchanged apart from insulation. Outside Seattle, rules vary by city and county. Our permits guide lists what offices say, and you should ask your city who pulls the permit and put it in the contract.
Checking the contractor
An association signs a large contract, so verify registration with L&I before award. The Verify a Contractor tool shows whether a contractor has an active registration, an active workers' comp account, citations and infractions, lawsuits against the surety bond and the owners' names. L&I also says a roofing specialty contractor may work only in the specialty it is registered for and cannot hire subcontractors. Washington's fall protection rules require protection when workers are exposed to fall hazards of four feet or more, which is part of why safe roof access should be priced into the bid. Our hiring guide covers the full checklist.
Liens matter on big jobs. L&I advises withholding payment while a lien notice is unresolved and getting signed lien releases from major contractors, subcontractors and suppliers before final payment. A consumer lien can be filed within 90 days of work stopping or materials being delivered, so the board or manager should collect releases with each draw.
What an individual owner can do
You may have less control than in a single-family house, but you are not powerless. Read the documents and the last reserve study. Attend board meetings. Photograph and report leaks, ceiling stains and missing shingles in writing, and keep copies. Ask when the roof was last inspected and what the report said. If you need your own interior repairs after a leak, ask whether the association's insurance or your own policy responds, and see our insurance claim guide for how to document a loss.
Do not go on the roof to look. For a fall hazard and a liability issue, an association roof is the wrong place for a curious owner. Use binoculars and the attic or ceiling instead.
Frequently asked questions
Who decides when an HOA roof is replaced?
Can I replace my own roof in an HOA?
Can an HOA ban solar panels on my roof?
How should owners prepare for a special assessment?
Sources
Last updated: