A brick chimney and a wood-framed roof expand and settle at different rates, so the joint between them is a common leak point. Roofers rebuild the flashing there, and sometimes a mason repairs the brick. Call the number on this page to be connected with a local roofing contractor in Port Orchard.

Is it the chimney at all?
A nearby skylight, vent pipe or roof valley can leak and send water along the framing to the chimney area. A careful roofer traces the water from the stain back upslope rather than assuming the brick is guilty.
Crickets and saddles
A cricket is a small roof-shaped structure built on the uphill side of a wide chimney. It splits the water flow so rain and debris run around the brick instead of piling against it. Many wide chimneys lack one, and leaks start at the back.
With a median build year of 2004 in Port Orchard, builder-grade chimney flashing from the original roof may be thin or caulk-dependent and worth checking.
Near the water, salt speeds rust on thin metal around a chimney, so flashing can fail sooner than it would inland.
Questions that affect the quote
- How wide is the chimney, and how tall above the roof?
- What is the roof pitch and shingle type?
- Is the mortar sound or crumbling?
- Is there a cricket already?
- Has it been sealed before?
Roof notes for Port Orchard
Reroof permits for Port Orchard addresses go through the City of Port Orchard permit office. Its published rule: the online roofing permit application is for residential reroofing projects replacing 21 squares or more (2,100 square feet of roofing) and any commercial reroof project; it cannot be used if any structural work is included.
Washington L&I registers construction contractors. Its free lookup shows whether a roofer's registration is active and whether there are claims against it.
Homes near the water around Port Orchard take more wind and salt exposure, which wears metal flashing and fasteners faster.
Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.
Calls from Port Orchard are often matched with roofers who also cover Bremerton, Olalla and Silverdale.
After the repair
Check the ceiling and attic near the chimney during the next steady rain, and again after a windy one. A dry result across different storms is reassuring. Tell the roofer quickly if dampness reappears, because a second path often exists.
Mold and rot worries
Long-running chimney leaks can soak framing and insulation, and musty smells follow. Stop the water first. Do not scrub large dark areas yourself; describe them to the roofer, who can say whether framing repair or another specialist is warranted.
Chimney Flashing Repair questions in Port Orchard
Do I need a mason or a roofer?
Is caulk enough to stop a chimney leak?
Can chimney flashing be fixed without replacing the roof?
My home has a prefabricated fireplace chase. Is that different?
More roofing services in Port Orchard
Chimney Flashing Repair nearby
Helpful guides
Sources
Last updated: