A roofer repairs damaged shingles by lifting the surrounding tabs, removing the broken piece and nails, sliding in a matching shingle and sealing it down. Most jobs touch only a small area. Call the number on this page to be connected with a local roofing contractor in Redmond.

Shingle problems you can spot from the ground
Check from the yard or with binoculars for shingles lying crooked, tabs that curl at the corners, dark bare squares where granules wore away, and torn pieces hanging at the edge. Pieces in the flowerbed or gutter are another clue that something has come off.
Wind lift
Strong southerly gusts slip under tab edges and break the sealant bond, especially on exposed slopes, ridges and corners. Once the seal is gone, even a moderate breeze can fold a tab back. Roofers re-seal or replace the shingle and look for others that were lifted nearby. Honest answers are a good sign.
Roofs on 1980s houses in Redmond often have two or more layers of shingles, so a roofer may need to cut through layers to seat a replacement properly.
Color and style matching
Weathered shingles fade, and some styles have been discontinued. A roofer may use the closest available shade, or pull good shingles from a less visible spot to patch a prominent one. Ask what is realistic before the work and how the repair will look. Save every receipt and note.
Warranty and materials
Shingle manufacturers offer warranties on their materials, and replacing parts of a roof can interact with those terms. Ask the roofer what applies to your roof and whether the repair affects it. Do not assume anything, and ask for any claim to be described in writing. Ask for it in writing.
Planning your call
Know the roof age if possible, how many shingles look damaged, whether leaks have shown up and where on the house the problem is. Mention steep slopes or second stories too. The details let the roofer arrive with suitable materials. The roofer can explain the reasoning behind each step.
Useful local facts for Redmond
Reroof permits for Redmond addresses go through the City of Redmond permit office. Its published rule: residential work exempt from permit includes light weight roof covering (composition, metal or similar) where installed unit weight is less than 4 pounds per square foot.
Washington L&I registers construction contractors. Its free lookup shows whether a roofer's registration is active and whether there are claims against it.
Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.
Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.
Much of the housing in Redmond dates to the 1980s or earlier, so a tear-off can uncover older layers or board decking that need extra work.
Nearby, the same kind of help is available in Kirkland, Bellevue and Woodinville.
More about Redmond
Calls come in from across Redmond, including around Overlake, Education Hill, Redmond Town Center.
Downtown Redmond sits just north of Lake Sammamish with the Sammamish River along its west edge.
Shingle Repair questions in Redmond
Will new shingles match my old ones?
What causes shingles to blow off?
Should I save the shingle pieces I find?
How can I verify a roofer in Washington?
More roofing services in Redmond
Shingle Repair nearby
Helpful guides
Sources
Last updated: