Storm damage repair restores a roof after wind, debris or heavy rain has lifted, creased or torn away shingles and bent flashing. A roofer inspects the whole surface, not only the visible gaps, and repairs what the wind loosened. Call the number on this page to be connected with a local roofing contractor in Redmond.

What wind damage looks like from the ground
Scan with binoculars for missing shingles, dark patches where granules have scoured off, tabs folded back, ridge caps shifted, and loose flashing. Shingle pieces in the yard or gutters are a clue, too. Leave the actual climbing to a roofer. Take photos as you go.
Ridge and hip caps
The highest, most exposed parts of the roof catch the strongest gusts. Ridge caps can lift, split or slide, leaving the peak open to rain. Roofers look closely at these lines and the exposed nails beneath them after any big storm. Even one lifted cap deserves repair soon.
Much of Redmond's housing dates to the 1980s, where aged shingles and original sheathing can fail more easily in high wind than newer roofs.
What the roofer can provide
A roofer can describe the damage in writing, list affected areas, note the roof's age and material, and explain the repair scope. That report supports a claim but does not decide it. The adjuster and your policy determine what is covered. Ask what the report will include before the visit.
Repair scope after a storm
A roofer may replace single shingles, redo a damaged section, reseal lifted tabs, refasten flashing or re-cap the ridge. The scope depends on how many pieces were lost, how old the roof is, and whether decking or underlayment took water. Ask which items likely apply here.
Check the gutters and yard
Shingle grit in the downspouts, bent gutter sections and debris against the foundation hint at roof damage above. Clear debris you can safely reach from the ground, and keep what you find. It helps both the roofer and any claim. Save any damaged pieces you pick up.
Local details for Redmond
Reroof permits for Redmond addresses go through the City of Redmond permit office. Its published rule: residential work exempt from permit includes light weight roof covering (composition, metal or similar) where installed unit weight is less than 4 pounds per square foot.
Washington requires roofing contractors to register with the Department of Labor & Industries. L&I's Verify a Contractor tool shows a company's registration status before you sign anything.
Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.
Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.
Much of the housing in Redmond dates to the 1980s or earlier, so a tear-off can uncover older layers or board decking that need extra work.
Contractors that take calls here usually also work in Kirkland, Bellevue and Woodinville.
Around Redmond
Calls come in from across Redmond, including around Overlake, Education Hill, Redmond Town Center.
Downtown Redmond sits just north of Lake Sammamish with the Sammamish River along its west edge.
Storm Damage Roof Repair questions in Redmond
Should I get the roof checked even if it looks fine?
Is a few missing shingles worth fixing?
Will new shingles match my old ones?
Should I take a roofer's word after a storm?
More roofing services in Redmond
Storm Damage Roof Repair nearby
Helpful guides
Sources
Last updated: