Roof flashing repair can mean replacing a cracked vent pipe boot, resetting step flashing along a wall, or reworking a valley. The right fix depends on which joint is failing and how the shingles overlap it. Call the number on this page to be connected with a local roofing contractor in University Place.

Signs the flashing has failed
- Stains on the ceiling next to a wall or dormer
- Water marks around a bathroom vent or plumbing stack
- Rust streaks running down shingles
- Metal that has lifted, bent or pulled loose
Any of these deserves a roofer's look.
Counter-flashing and caps
Counter-flashing is a second piece that covers the top of base flashing and sheds water over it. Without it, the joint relies on sealant. Rust or gaps at the cap let rain behind the base metal, so the fix often means replacing both layers together.
Wind off the water pushes rain sideways into roof joints, and salt air corrodes metal flashing and fasteners, so waterfront roofs may benefit from corrosion-resistant materials.
Rotted decking changes the job
If water has leaked for a long time, the plywood under the flashing may be soft. Replacing a section of decking adds labor and material to the repair. Ask the roofer to explain what they find and to show you photos before agreeing to extra work.
Why sealant alone fails
Caulk and roofing cement fill gaps but do not provide the overlap that sheds water. They shrink, crack and trap moisture. A roofer who offers only sealant at a failed joint should explain how water will be directed away afterward.
After a windstorm
Strong winter winds can bend and lift flashing along ridges, walls and edges. From the ground, look for metal sticking up or lying in the yard. Photograph it and keep any fallen pieces. These details help the roofer and any insurance conversation.
Know this about University Place roofs
If the job grows from a patch into a full reroof or framing repair, check with the City of University Place permit office before work starts.
Washington L&I registers construction contractors. Its free lookup shows whether a roofer's registration is active and whether there are claims against it.
Homes near the water around University Place take more wind and salt exposure, which wears metal flashing and fasteners faster.
Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.
Storm took out power too? Report it to Tacoma Power at 253-502-8602, and stay clear of any downed line.
Write down when the leak appears: every rain, only in wind-driven rain, or only after snow. That detail points straight to the cause.
Contractors that take calls here usually also work in Lakewood, Tacoma and Fox Island.
Roof Flashing Repair questions in University Place
Can flashing be repaired without replacing the roof?
Why do plumbing vent boots crack?
Does this service charge me for the call?
My home is near the water. Does that change anything?
More roofing services in University Place
Roof Flashing Repair nearby
Helpful guides
Sources
Last updated: