Roofing referrals for Seattle & nearby townsCall: (206) 984-7830
(206) 984-7830

Metal Roofing in Kirkland, WA

roofingseattle.net

Questions about panels, fasteners or coastal finishes in Kirkland? This page routes you to roofers who install metal.

Thinking about a metal roof in Kirkland?
Call now to be connected with a local roofing contractor in Kirkland.
(206) 984-7830

Metal costs more up front than asphalt shingles, but panels last many years and shed debris easily. The right choice depends on how long you plan to own the house. Call the number on this page to be connected with a local roofing contractor in Kirkland.

A modern Northwest house with a dark standing seam metal roof surrounded by evergreen trees and ferns, metal roofing in Kirkland, WA

Gauge and panel thickness

Heavier-gauge metal resists denting and oil-canning, the wavy look that can appear on wide flat panels. Thicker material costs more. Ask your roofer what gauge is quoted, how wide the panels are and what profile ribs help keep large surfaces flat. Ask which gauge the quote assumes.

Shedding moss, needles and rain

Smooth coated metal gives moss little to grip, and needles tend to slide off. That is a real advantage under tall trees. Shaded, damp spots can still grow algae, but cleaning is easier than on textured shingles, and the surface does not lose granules. That makes upkeep simpler for owners.

Many 1980s houses here have narrow eaves and chimneys that need custom metal flashing, so ask how those details will be formed.

Call now to be connected with a local roofing contractor in Kirkland.
(206) 984-7830

Metal over existing shingles

Some systems install over a single layer of shingles using battens, which saves tear-off and disposal. Critics say it hides deck problems and can trap moisture. A roofer should inspect the decking and explain why overlay is or is not appropriate for your roof. Ask what the deck looks like first.

Roof notes for Kirkland

If the job grows from a patch into a full reroof or framing repair, check with the City of Kirkland permit office before work starts.

Washington L&I registers construction contractors. Its free lookup shows whether a roofer's registration is active and whether there are claims against it.

Most roof trouble in this part of Washington shows up in the wet season, when a small gap in flashing or a lifted shingle has months of rain to work on.

Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.

Much of the housing in Kirkland dates to the 1980s or earlier, so a tear-off can uncover older layers or board decking that need extra work.

Before you call, note how many stories the house is and snap photos of the problem spots from the ground. It helps the roofer plan ladders and materials.

Calls from Kirkland are often matched with roofers who also cover Redmond, Kenmore and Medina.

Warranties on finish and panels

Manufacturers publish finish and material warranties for metal, and installers may offer workmanship terms. Read what each covers, what voids it, such as improper fasteners or cleaning products, and whether the warranty transfers to a future owner. Keep every document in one folder.

Planning around lead times

Custom panels and trim take time to fabricate and deliver. Ordering in late winter for a summer start is wise, and roofers may have a backlog in dry months. Ask when measurements are due and when panels will arrive. Delays in fabrication are common.

Kirkland at a glance

Calls come in from across Kirkland, including around Juanita, Totem Lake, Houghton.

Kirkland's downtown sits on Lake Washington along Moss Bay, with Juanita Bay to the north, so lakeside homes take wind off the water.

Metal Roofing questions in Kirkland

What is the difference between standing seam and corrugated metal?
Standing seam uses raised seams and hidden clips, so no screws show on the surface. Corrugated or ribbed panels are screwed through the face and cost less but need more fastener upkeep.
How long does a metal roof last?
Manufacturers publish material and finish warranties, and metal commonly outlasts several shingle roofs. Actual life depends on the metal, finish, installation and exposure. Ask for specifics.
Does metal make the house hotter or colder?
Reflective finishes can reduce summer heat, and good insulation and ventilation matter more. Metal does not insulate by itself, so ask the roofer how the assembly is designed.
How long does a metal roof take to install?
Many projects take a few days, but custom panels can add weeks before work begins. Ask the roofer for the fabrication lead time and a realistic install window.

More roofing services in Kirkland

Metal Roofing nearby

Call now to be connected with a local roofing contractor in Kirkland.
(206) 984-7830

Last updated:

☎ Call (206) 984-7830