Roofing referrals for Seattle & nearby townsCall: (206) 984-7830
(206) 984-7830

Metal Roofing in Seattle, WA

roofingseattle.net

Metal sheds rain and moss well, which suits Seattle's wet winters and shaded lots.

Weighing a metal roof?
Call now to be connected with a local roofing contractor in Seattle.
(206) 984-7830

Metal roofing uses steel or aluminum panels, often standing seam, that shed water quickly and resist moss better than many other coverings. Seattle owners choose it for wet winters, shaded lots and long service life. Call the number on this page to be connected with a local roofing contractor in Seattle.

A modern Northwest house with a dark standing seam metal roof surrounded by evergreen trees and ferns, metal roofing in Seattle, WA

What metal roofing is

Metal roofs come as standing-seam panels with raised, locked seams, as exposed-fastener panels, or as stamped pieces that imitate shingles or tile. They install over solid decking with underlayment, and the seams, ridge and edges rely on careful flashing. Quality of that detail work matters as much as the metal itself.

Why it comes up in Seattle

NWS describes the Sea-Tac rainy season as running October through March, with more than 75 percent of the year's precipitation falling in that stretch. A smooth panel surface sheds that water and gives moss little to hold, though Oregon State Extension notes moss needs shade, so trees overhanging a Seattle roof still matter. Metal also suits steeper craftsman rooflines and the newer homes where owners want a long-lived covering. On the flip side, fir needles and debris can collect in valleys and behind chimneys, so keep gutters and valleys clear.

What happens on the call and the visit

Call now to be connected with a local roofing contractor in Seattle.
(206) 984-7830

A roofer will ask about roof size, pitch, existing layers and whether you want standing seam or a lower-cost panel. Ask which profile and gauge are being bid, how the seams and penetrations are flashed, whether the old roof is torn off and what underlayment goes below. Ask about manufacturer warranties on the panels and finish and read what they actually cover.

What it costs

Angi's Seattle metal roofing guide puts a typical total installation at about $8,207 to $23,075, with installed metal near $5 to $22 per square foot in its roof replacement guide and standing seam around $7 to $30 per square foot. RoofingCalc's greater Seattle figures sit at roughly $12.50 to $20.50 per square foot. These are cost guides, not bids, and complex rooflines push the high end.

Permits, hiring and safety

Seattle's SDCI says re-roof work on one- and two-family homes and townhouses generally does not need a permit when the building envelope is unchanged apart from adding or replacing insulation. Repairing an area over 500 square feet, and commercial and multifamily work, does require one. Seattle's residential code also bars re-covering a roof that already has two or more applications of roof covering, so a tear-off may be required.

Washington roofers must be registered with L&I. Look up any contractor on the Verify a Contractor tool, and get a signed lien release before final payment.

Metal Roofing questions from Seattle homeowners

Is a metal roof a good fit for Seattle's rain?
Many owners think so because the panels shed water fast and moss has little to grip. Shade and debris still matter, so valleys and gutters need regular attention.
What does a metal roof cost in Seattle?
Angi's Seattle guide lists a typical total of about $8,207 to $23,075, and RoofingCalc shows about $12.50 to $20.50 per square foot. Your quote depends on size, pitch and panel type.
Can metal go over my old shingles?
Seattle's residential code does not allow re-covering a roof with two or more existing applications of roof covering, or one that is water-soaked or deteriorated. Ask the contractor what applies to your roof.
Do I need a permit to install a metal roof?
SDCI says re-roofing a one- or two-family home or townhouse generally does not need a permit if the envelope is unchanged apart from insulation. Confirm with SDCI or ask your contractor.

Related roofing services in Seattle

Metal Roofing in nearby cities and towns

King County

Snohomish County

Pierce County

Kitsap County

Island County

Mason County

Jefferson County

Call now to be connected with a local roofing contractor in Seattle.
(206) 984-7830

Last updated:

☎ Call (206) 984-7830