Metal costs more up front than asphalt shingles, but panels last many years and shed debris easily. The right choice depends on how long you plan to own the house. Call the number on this page to be connected with a local roofing contractor in Lake Stevens.

Gauge and panel thickness
Heavier-gauge metal resists denting and oil-canning, the wavy look that can appear on wide flat panels. Thicker material costs more. Ask your roofer what gauge is quoted, how wide the panels are and what profile ribs help keep large surfaces flat. Ask which gauge the quote assumes.
Thermal movement and fasteners
Metal expands and contracts through daily and seasonal temperature swings. Concealed clips let standing seam move freely, while screws in exposed-fastener roofs can back out and need checking. Ask how movement is accommodated and what maintenance the roof will need. Ask about periodic maintenance visits.
Under tall firs and cedars, smooth metal sheds needles and moss better than shingles, though branches can scratch finishes, so keep limbs trimmed back from the roof edge.
Flashing and details matter most
Valleys, chimneys, skylights and walls demand custom-formed trim in metal roofing, and mistakes show quickly. Experienced installers bend and fit pieces on site. Ask who handles flashing, what material it is and how penetrations are sealed. Ask to see sample trim pieces.
Insurance and energy considerations
Some insurers weigh roof material when setting premiums, and reflective finishes can reduce summer attic heat. Ask your agent whether metal affects your policy, and ask the roofer which finishes suit your exposure. These are secondary to a sound installation. Do not assume savings without checking.
Roof notes for Lake Stevens
Reroof permits for Lake Stevens addresses go through the City of Lake Stevens permit office. Its published rule: the city accepts re-roofing permits online; composition, metal or similar roof coverings with an installed weight under 4 pounds per square foot are exempt from residential building permits under city ordinance.
Before work begins, look the company up on L&I's Verify a Contractor page. Washington requires construction contractors, roofers included, to be registered.
Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.
With big firs and cedars close to many homes in Lake Stevens, falling limbs during windstorms are a real roof risk. Trimming overhanging branches helps.
Storm took out power too? Report it to Snohomish PUD at 425-783-1001, and stay clear of any downed line.
Contractors that take calls here usually also work in Marysville, Snohomish and Everett.
Checking fasteners and seams
On exposed-fastener roofs, screws can loosen and washers crack as metal moves with temperature. A roofer can tighten or replace them during a maintenance visit. Standing seam needs less attention but should still be checked for loose trim after strong storms. Do not tighten anything yourself from a ladder.
Metal Roofing questions in Lake Stevens
What metal is best near salt water?
Does a metal roof need a permit?
Will metal roofing hurt my property value or insurance?
Does metal roofing work near tall trees?
More roofing services in Lake Stevens
Metal Roofing nearby
Helpful guides
Sources
Last updated: