Metal roofs come mainly as standing-seam panels with hidden fasteners or as ribbed panels with exposed screws, and each has different cost and maintenance. Standing seam is the premium choice. Call the number on this page to be connected with a local roofing contractor in Lakewood.

Standing seam versus exposed-fastener panels
Standing-seam panels lock together along raised seams with concealed clips, so no screws pierce the surface. Exposed-fastener panels are screwed through the face and use rubber washers that age. Standing seam costs more but needs less long-term attention. Ask which one the quote assumes, and why.
Snow and ice slides
- Snow can release all at once
- Snow guards or retention bars slow slides
- Entries, walkways and decks need protection
- Gutters take extra load
Snow is infrequent here, but a roofer can plan for it. Ask your roofer to plan for each of these.
Metal over existing shingles
Some systems install over a single layer of shingles using battens, which saves tear-off and disposal. Critics say it hides deck problems and can trap moisture. A roofer should inspect the decking and explain why overlay is or is not appropriate for your roof. Ask what the deck looks like first.
Why metal costs more up front
Panels are costlier than asphalt shingles, and installation takes specialized skill and trim work. Owners weigh that against longer service life, shedding performance and lower upkeep. Ask the roofer for a comparison on your roof, not a general claim. Ask the roofer to show how the comparison works for your house.
Before you call in Lakewood
Building permits for Lakewood homes are handled by the City of Lakewood permit office. Small repairs often need nothing, while a tear-off, new sheathing or structural work usually does, so ask the roofer who pulls the permit.
Before work begins, look the company up on L&I's Verify a Contractor page. Washington requires construction contractors, roofers included, to be registered.
Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.
Storm took out power too? Report it to Tacoma Power at 253-502-8602, and stay clear of any downed line.
Write down when the leak appears: every rain, only in wind-driven rain, or only after snow. That detail points straight to the cause.
Calls from Lakewood are often matched with roofers who also cover University Place, Tacoma and Fox Island.
After installation
Walk the roof lines from the ground and check trim, ridge, valleys and snow guards. Keep the contract, finish and material warranty papers, paint codes and permit sign-off. Future repairs and touch-ups are easier when the exact panel and color are on record. Take dated photos while the work is fresh.
Metal Roofing questions in Lakewood
Is a metal roof louder in the rain?
What metal is best near salt water?
How long does a metal roof last?
Does metal make the house hotter or colder?
More roofing services in Lakewood
Metal Roofing nearby
Helpful guides
Sources
Last updated: