A skylight repair can be as small as new sealant and a corrected flashing kit, or as involved as replacing a worn unit. In a wet climate like ours, the roof edges of the opening get the most abuse. Call the number on this page to be connected with a local roofing contractor in Redmond.

Track the pattern
Jot down when the dampness appears. Water that shows only on cold, still mornings usually is condensation. Water that follows a rainstorm, wind-driven rain or melting snow points toward the flashing. Notes and photos help a roofer decide where to look first, and they cost nothing to collect.
Old seals and aging glass units
Sealed glass units have a limited life. Heat, sun and years of expansion break down the edge seal, letting vapor in and fogging the panes. A unit that has fogged is already past its best, so ask the roofer whether the glass or the whole skylight should be addressed.
Homes from the 1980s in Redmond often have skylights added decades after the roof, so the roofer checks whether the framing and surrounding shingles were done properly.
Why a quote can change on site
From the ground, a skylight looks simple. Once the roofer lifts the shingles, rotted wood or buried patching can add work. A fair roofer explains what was found, shows photos and lets you decide, rather than quietly adding items to the bill at the end of the day.
Warranty questions, carefully
Skylight makers often back their products with warranties on glass and seals, and roofers may stand behind their own work. Ask what applies, what it covers and what paperwork is needed. Do not assume anything is covered, and keep any answers in writing so nothing gets lost.
Temporary protection
If a pane is broken, a roofer may place a protective cover over it. You can reduce interior damage by covering furniture and moving belongings. Avoid taping plastic over the outside yourself; that means going on the roof, which is where people get hurt. Cover things inside instead.
Roof notes for Redmond
Permit note from the City of Redmond permit office: Residential work exempt from permit includes light weight roof covering (composition, metal or similar) where installed unit weight is less than 4 pounds per square foot.
Washington requires roofing contractors to register with the Department of Labor & Industries. L&I's Verify a Contractor tool shows a company's registration status before you sign anything.
Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.
Electric service here comes from PSE (outages: 888-225-5773). Keep away from any line touching the house or a fallen tree.
Much of the housing in Redmond dates to the 1980s or earlier, so a tear-off can uncover older layers or board decking that need extra work.
Calls from Redmond are often matched with roofers who also cover Kirkland, Bellevue and Woodinville.
Redmond at a glance
Calls come in from across Redmond, including around Overlake, Education Hill, Redmond Town Center.
Downtown Redmond sits just north of Lake Sammamish with the Sammamish River along its west edge.
Skylight Repair questions in Redmond
How do I tell condensation from a leak?
What is a skylight flashing kit?
Why does my skylight leak only in heavy wind and rain?
How are repair prices decided?
More roofing services in Redmond
Skylight Repair nearby
Helpful guides
Sources
Last updated: