Roofing referrals for Seattle & nearby townsCall: (206) 984-7830
(206) 984-7830

Chimney Flashing Repair in SeaTac, WA

roofingseattle.net

A brown stain on the ceiling near the fireplace wall may trace to the chimney, and a roofer in SeaTac can find the source.

Water in the fireplace in SeaTac?
Call now to be connected with a local roofing contractor in SeaTac.
(206) 984-7830

A brick chimney and a wood-framed roof expand and settle at different rates, so the joint between them is a common leak point. Roofers rebuild the flashing there, and sometimes a mason repairs the brick. Call the number on this page to be connected with a local roofing contractor in SeaTac.

A brick chimney with new metal flashing installed on a shingled roof, chimney flashing repair in SeaTac, WA

Signs of a chimney leak

Look for brown stains on the ceiling or wall near the chimney breast, damp patches on the fireplace wall, a musty odor in the attic around the brick, or white powder on the masonry. Water often appears days after rain, far from where it entered.

How chimney flashing is built

The base of the chimney is wrapped in layers. Step flashing goes up the sides, a front apron lies under the shingles, and counter-flashing is tucked into cut mortar joints above to cover the top edge. Each layer depends on the others for protection.

Call now to be connected with a local roofing contractor in SeaTac.
(206) 984-7830

Mason and roofer scopes

The roofer covers metal, shingles and the cricket, while a mason handles brick, mortar and crown repairs. Having both on one project means two prices. Ask each what is included, so no step falls between them and you avoid paying twice.

Before you call in SeaTac

If the job grows from a patch into a full reroof or framing repair, check with the City of SeaTac permit office before work starts.

Washington L&I registers construction contractors. Its free lookup shows whether a roofer's registration is active and whether there are claims against it.

Most roof trouble in this part of Washington shows up in the wet season, when a small gap in flashing or a lifted shingle has months of rain to work on.

If a tree has brought down a power line onto the roof, stay well away and call 911 first.

Before you call, note how many stories the house is and snap photos of the problem spots from the ground. It helps the roofer plan ladders and materials.

Nearby, the same kind of help is available in Tukwila, Burien and Des Moines.

Warranty questions

Materials like metal and sealant may carry manufacturer warranties, and a roofer may stand behind labor. Ask what applies and for how long, and keep answers in writing. A masonry contractor will have terms of their own, so ask both.

Use of the fireplace

Hold off using the fireplace if water is coming down the flue or the firebox is soaked, and ask a chimney professional about the flue's condition before the next fire. Damp masonry can also hide cracks that affect safe burning.

Chimney Flashing Repair questions in SeaTac

Is the leak from the flashing or the mortar?
Leaks at the roofline often point to flashing, while dampness on the brick above the roof suggests mortar, crown or cap trouble. A roofer can help confirm which.
Can chimney flashing be fixed without replacing the roof?
Usually yes. If the shingles are sound, a roofer can reflash the chimney and tie it into the existing roof.
How often should chimney flashing be checked?
A look every few seasons and after big windstorms is sensible, particularly in shady, mossy settings. Early catches cost less than ceiling and framing repairs.
Is it safe to patch the flashing myself?
No. Chimneys sit high on slippery, steep slopes, and loose brick can be nearby. Check from the ground and the attic, then call a roofer.

More roofing services in SeaTac

Chimney Flashing Repair nearby

Call now to be connected with a local roofing contractor in SeaTac.
(206) 984-7830

Last updated:

☎ Call (206) 984-7830