Rain on metal can sound louder than on shingles, but solid decking, underlayment and attic insulation absorb most of it. Most owners find it comfortable and even pleasant. Call the number on this page to be connected with a local roofing contractor in SeaTac.

Metal on low slopes and additions
Standing seam can work on lower slopes than most shingles, as long as seams are sealed and the profile is rated for the pitch. For ADUs, porches and shed roofs, ask the roofer about the minimum slope the chosen panel allows. Check that gutters and drainage match the slope.
Snow and ice slides
- Snow can release all at once
- Snow guards or retention bars slow slides
- Entries, walkways and decks need protection
- Gutters take extra load
Snow is infrequent here, but a roofer can plan for it. Ask your roofer to plan for each of these.
Metal over existing shingles
Some systems install over a single layer of shingles using battens, which saves tear-off and disposal. Critics say it hides deck problems and can trap moisture. A roofer should inspect the decking and explain why overlay is or is not appropriate for your roof. Ask what the deck looks like first.
Permits, weather and roofs in SeaTac
For permit questions on a reroof, start with the City of SeaTac permit office. A contractor who works here regularly will know whether your job needs anything filed.
A quick check that pays off: enter the contractor's name in L&I's online verify tool to confirm an active Washington registration.
Most roof trouble in this part of Washington shows up in the wet season, when a small gap in flashing or a lifted shingle has months of rain to work on.
If a tree has brought down a power line onto the roof, stay well away and call 911 first.
Before you call, note how many stories the house is and snap photos of the problem spots from the ground. It helps the roofer plan ladders and materials.
Nearby, the same kind of help is available in Tukwila, Burien and Des Moines.
Long-term value
Owners who plan to stay many seasons often favor metal because panels shed moss and debris and may outlast several shingle roofs. If you will sell soon, appraisers and buyers may still value metal, but returns vary. Ask a roofer for honest guidance. Ask how long you plan to stay in the house.
Preparing the property
Metal panels are long and awkward, so crews need clear space for staging and deliveries. Move vehicles, mark sprinkler heads and trim shrubs near eaves. Tell the roofer about slopes, overhead lines and rural driveways before delivery day. Clear lanes also help the crew work safely.
Metal Roofing questions in SeaTac
Is a metal roof louder in the rain?
What is the difference between standing seam and corrugated metal?
Does a metal roof need a permit?
How long does a metal roof take to install?
More roofing services in SeaTac
Metal Roofing nearby
Helpful guides
Sources
Last updated: