Cedar shakes are a long-standing Northwest roof, but Seattle's wet winters and tree cover are hard on them. Shake work ranges from replacing a few split pieces to a full reroof. Call the number on this page to be connected with a local roofing contractor in Seattle.

What cedar shake work involves
Cedar shakes are split or sawn wood pieces laid in overlapping courses. A shake roof has a rough, textured look that suits craftsman bungalows and wooded lots around Seattle. Work on these roofs falls into three groups: replacing individual damaged shakes, cleaning and treating a roof that is still sound, and tearing off and reroofing the whole thing.
Signs a shake roof needs attention
Seattle's long rainy season keeps wood damp for months, so watch for problems from the ground or with binoculars. Do not climb a wet or mossy shake roof; it is slick and the wood can split underfoot.
- Shakes that are curled, cupped, cracked or missing
- Thick moss or dark staining, especially on north slopes under firs and cedars
- Bare patches, or debris packed between courses
- Water stains on attic sheathing or a ceiling after rain
NWS describes the Sea-Tac rainy season as running from October through March, with more than 75 percent of annual precipitation falling in that stretch. Shade slows drying, which is why the same roof can look fine on one slope and tired on another.
What happens on the call and the visit
You describe the roof, its age and what you have seen. A local roofer looks at the shakes, the underlayment where it is visible, the flashing and the attic side of the deck. Ask whether the contractor works on shake roofs regularly, since the trade differs from asphalt shingle work. Ask about the spacing and fastening of new shakes, the underlayment and how a tear-off will be handled.
What it costs
One Seattle cost guide, RoofingCalc, puts installed cedar shakes in the greater Seattle area at about $12.50 to $18.50 per square foot. Angi's Seattle figure for installed wood shingle is wider, about $6 to $18 per square foot. HomeGuide's national figures for a minor shake repair of up to 10 square feet run about $150 to $1,000. Your bid will depend on pitch, roof size, tear-off and access.
Permits and rules to ask about
Seattle's residential code says a roof replacement includes removing the old covering down to the deck. Seattle SDCI states that a re-roof permit is required when repairing an area greater than 500 square feet, and that re-roof work on one- and two-family homes and townhouses generally does not need a permit if the building envelope is unchanged apart from insulation. Ask the roofer who pulls any permit.
Hiring a roofer
Washington roofers must register with L&I. Use L&I's Verify a Contractor tool to confirm an active registration, then get a written bid with the scope, materials and cleanup. Ask for lien releases before final payment, as L&I advises.
Cedar Shake Roofing questions from Seattle homeowners
How much does a cedar shake roof cost in Seattle?
Can moss damage a cedar shake roof?
Do I need a permit to replace a shake roof in Seattle?
Can I go up and check the shakes myself?
Related roofing services in Seattle
Helpful guides
Cedar Shake Roofing in nearby cities and towns
King County
Snohomish County
Pierce County
Kitsap County
Island County
Mason County
Jefferson County
Sources
Last updated: