TPO is a single-ply membrane made from thermoplastic polyolefin, usually white, with seams that a roofer welds together with hot air. It is rolled across the roof in wide sheets. Call the number on this page to be connected with a local roofing contractor in Burien.

Types of TPO in the field
Membranes come in different thicknesses, reinforced with fabric or polyester scrim. Thicker sheets resist punctures and foot traffic better. A roofer can explain which version suits a roof that sees heavy use or lots of falling debris. Ask which thickness the roofer recommends and why it suits your building.
When membrane gets old
As TPO ages it can become stiff, chalky or cracked at folds and corners. Aged material welds less cleanly, so repairs may not hold for long. When many spots fail, a roofer may recommend replacing the membrane. Ask for an honest estimate of the roof's remaining life, with photos.
Local details for Burien
If the job grows from a patch into a full reroof or framing repair, check with the City of Burien permit office before work starts.
Before work begins, look the company up on L&I's Verify a Contractor page. Washington requires construction contractors, roofers included, to be registered.
Most roof trouble in this part of Washington shows up in the wet season, when a small gap in flashing or a lifted shingle has months of rain to work on.
If a tree has brought down a power line onto the roof, stay well away and call 911 first.
Find the age of the roof if you can (closing papers or old receipts help) and note where any water shows up inside.
Nearby, the same kind of help is available in Tukwila, SeaTac and Vashon.
Tear-off or recover
A new TPO sheet can sometimes go over an older roof if it is dry and sound. If the old layers hold moisture, the roofer may recommend a tear-off. That choice changes disposal, labor and timing quite a bit. Ask the roofer to show you moisture readings that support the recommendation.
Rooftop equipment and walkways
Air handlers, vents and antennas create foot traffic and extra penetrations. Walkway pads protect the membrane where crews walk. Each penetration is a flashing detail the roofer must weld, so more equipment means more attention. Ask the roofer to mark walkways clearly so service visits do not scar the roof surface.
What a clean job looks like
Seams should be uniform with no wrinkles or scorched edges. Flashings should sit tight and be sealed at the top. Drains should sit at the low point with no ponding. A roofer will gladly walk you through the finished work. Ask for photos during the work as well.
TPO Roofing questions in Burien
How long does a TPO roof last?
How does a TPO roof handle foot traffic?
What affects the price of TPO roofing?
How do I check a roofer is registered in Washington?
More roofing services in Burien
TPO Roofing nearby
Helpful guides
Sources
Last updated: