Roofers who handle wood shakes will look at the shakes, the underlayment, the flashing and the spacing boards before suggesting anything. Many shake roofs here fail from the underside up, which a quick look from the ground can miss. Call the number on this page to be connected with a local roofing contractor in Redmond.

Moss, rot and what they mean
Thick moss is not just cosmetic on a wood roof. It holds water against shakes and can hide rot underneath. If the moss mat lifts away with bare, dark or crumbly wood beneath it, the shakes under that patch may already be past saving.
How installation shapes lifespan
Shakes need airflow behind them to dry, which is why traditional installs use spaced boards or a ventilated gap. Roofs laid tight over solid decking tend to stay wet longer. That difference often explains why two neighbors with similar roofs see very different wear. Replacing shakes alone rarely fixes that.
Houses from the 1980s are common in Redmond, and long-lived cedar roofs on them often hide aged underlayment and chimney flashing that deserve a careful look.
Material choice changes the total
Switching from cedar to architectural asphalt, metal or composite shake-look products changes both the upfront price and long-term upkeep. Each has its own weight, installation method and warranty terms, so ask for itemized quotes you can compare line by line. Compare weight, lifespan and fire rating alongside price.
Matching new shakes to old
Fresh cedar looks bright against weathered neighbors, then fades toward gray over time. Roofers can pick grades and thickness that blend as well as possible, though some color difference is normal early on. Ask what to expect before the work begins. Expect a slight difference.
Gather information for the call
Know the roof's approximate age, whether it has underlayment, any past repairs and where you see problems. Notes and photos make it easier for the roofer to give useful guidance, and they help later if an insurance claim is involved. Keep notes in one place.
Roof notes for Redmond
On permits, the City of Redmond permit office says: residential work exempt from permit includes light weight roof covering (composition, metal or similar) where installed unit weight is less than 4 pounds per square foot.
Washington requires roofing contractors to register with the Department of Labor & Industries. L&I's Verify a Contractor tool shows a company's registration status before you sign anything.
Fall and winter windstorms are the main source of sudden roof damage around Puget Sound. Lifted tabs and loose ridge caps are worth a look after a blow.
Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.
Much of the housing in Redmond dates to the 1980s or earlier, so a tear-off can uncover older layers or board decking that need extra work.
Calls from Redmond are often matched with roofers who also cover Kirkland, Bellevue and Woodinville.
Redmond at a glance
Calls come in from across Redmond, including around Overlake, Education Hill, Redmond Town Center.
Downtown Redmond sits just north of Lake Sammamish with the Sammamish River along its west edge.
Cedar Shake Roofing questions in Redmond
Should I pressure wash my cedar roof?
What are the alternatives to replacing with new cedar?
Can I do small repairs myself?
Do I need a permit to reroof a shake roof?
More roofing services in Redmond
Cedar Shake Roofing nearby
Helpful guides
Sources
Last updated: