Roofing referrals for Seattle & nearby townsCall: (206) 984-7830
(206) 984-7830

TPO Roofing in Redmond, WA

roofingseattle.net

A TPO roof on a Redmond home, addition or shop depends on clean welds, so the roofer you pick matters.

Want a white reflective roof in Redmond?
Call now to be connected with a local roofing contractor in Redmond.
(206) 984-7830

Price depends on membrane thickness, how it is attached, the insulation below, the flashing detail and how reachable the roof is. Each independent roofer sets his own price. Call the number on this page to be connected with a local roofing contractor in Redmond.

A worker uses an automatic welder on the seam of a white TPO membrane on a commercial flat roof, tpo roofing in Redmond, WA

How a TPO roof is built

Below the membrane sits insulation board and a sound deck. The sheet is either fastened through the insulation, glued down or held in place with ballast. Edge metal and flashings finish the perimeter, and each piece must match the rest. Ask which method suits your deck.

Flashings and corners need extra care

Walls, pipes, curbs and corners require cut pieces and hand welding. These spots take the most thermal movement and the most attention. If a leak is near a penetration or corner, the roofer will start there. Ask the roofer whether corners and penetrations are welded by hand or pre-formed.

Call now to be connected with a local roofing contractor in Redmond.
(206) 984-7830

Seasonal scheduling

TPO needs a dry, clean surface, and rain or cold can delay work. Many roofers book summer jobs early. Wet seasons can mean waiting for a dry window or using a temporary cover, so ask about timing. Ask when a dry window is expected and what protects the roof meanwhile.

Drainage and ponding on TPO

Thermoplastic membranes tolerate water better than some, but standing puddles still collect dirt, algae and strain. A good plan moves water to drains. If puddles remain after a dry spell, the roofer should explain why. A roofer can often improve drainage with small changes, such as tapered pieces.

What a clean job looks like

Seams should be uniform with no wrinkles or scorched edges. Flashings should sit tight and be sealed at the top. Drains should sit at the low point with no ponding. A roofer will gladly walk you through the finished work. Ask for photos during the work as well.

Know this about Redmond roofs

Permit note from the City of Redmond permit office: Residential work exempt from permit includes light weight roof covering (composition, metal or similar) where installed unit weight is less than 4 pounds per square foot.

Before work begins, look the company up on L&I's Verify a Contractor page. Washington requires construction contractors, roofers included, to be registered.

Fall and winter windstorms are the main source of sudden roof damage around Puget Sound. Lifted tabs and loose ridge caps are worth a look after a blow.

Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.

Much of the housing in Redmond dates to the 1980s or earlier, so a tear-off can uncover older layers or board decking that need extra work.

Nearby, the same kind of help is available in Kirkland, Bellevue and Woodinville.

More about Redmond

Calls come in from across Redmond, including around Overlake, Education Hill, Redmond Town Center.

Downtown Redmond sits just north of Lake Sammamish with the Sammamish River along its west edge.

TPO Roofing questions in Redmond

What does TPO stand for?
TPO stands for thermoplastic polyolefin. It is a flexible plastic-based membrane that softens when heated, which is why roofers can weld the seams together with hot air.
How long does a TPO roof last?
It depends on membrane thickness, installation quality, drainage, sun exposure and upkeep. A roofer can estimate remaining life by looking at the welds, surface and flashings.
Is TPO better than EPDM?
Neither wins everywhere. EPDM is a rubber sheet with glued seams, while TPO is welded. Choice depends on the building, budget and the experience of the roofer.
What affects the price of TPO roofing?
Roof size, membrane thickness, insulation, attachment method, flashing detail and access all matter. Each independent roofer sets his own price. This referral service does not quote prices.

More roofing services in Redmond

TPO Roofing nearby

Call now to be connected with a local roofing contractor in Redmond.
(206) 984-7830

Last updated:

☎ Call (206) 984-7830